Description
Product highlights
- Cisco Catalyst 1000 Series Switches feature:
- 8, 16, 24, or 48 Gigabit Ethernet and 24, 48 port Fast Ethernet data or PoE+ ports with line-rate forwarding
- 2 or 4 fixed 1 Gigabit Ethernet Small Form-Factor Pluggable (SFP)/RJ 45 Combo uplinks (8 Port models only) or 4 fixed 10 Gigabit Ethernet Enhanced SFP (SFP+) uplinks on the Gigabit Ethernet models and 4 fixed 1 Gigabit Ethernet Small Form-Factor Pluggable (SFP) and 2 RJ 45 Combo uplinks on the Fast Ethernet models
- Perpetual PoE+ support with a power budget of up to 740W
- CLI and/or intuitive web UI manageability options
- Network monitoring through sampled flow (sFlow)
- Security with 802.1X support for connected devices, Switched Port Analyzer (SPAN), and Bridge Protocol Data Unit (BPDU) Guard
- Compact fanless models available with a depth of less than 13 inches (33 cm)
- Device management support with over-the-air access via Bluetooth, Simple Network Management Protocol (SNMP), RJ-45, or USB console acces
- Reliability with a higher Mean Time Between Failures (MTBF) and an Enhanced Limited Lifetime Warranty support (E-LLW)
Specifications
Console ports
- RJ-45 Ethernet : 1
- USB mini-B : 1
- USB-A port for storage and Bluetooth console : 1
Memory and processor
- CPU : ARM v7 800 MHz
- DRAM : 512 MB
- Flash memory : 256 MB
Performance
- Forwarding bandwidth :
- FE: 6.4 Gbps
- 1G: 28 Gbps
- 10G: 64 Gbps
- Switching bandwidth :
- FE: 12.8 Gbps
- 1G: 56 Gbps
- 10G: 128 Gbps
- Forwarding rate (64?byte L3 packets) :
- FE: 9.52 Mpps
- 1G: 41.67 Mpps
- 10G: 95.23 Mpps
- MAC addresses : 16000
- IPv4 unicast direct routes : 542
- IPv4 unicast indirect routes : 256
- IPv6 unicast direct routes : 414
- IPv6 unicast indirect routes : 128
- IPv4 multicast routes and IGMP groups : 1024
- IPv6 multicast groups : 1024
- IPv4/MAC security ACEs : 600 (FE: 384)
- IPv6 security ACEs : 600 (FE: 256)
- Maximum active VLANs : 256
- VLAN IDs available : 4094
- Maximum STP instances : 64
- Maximum SPAN sessions : 4
- MTU-L3 packet : 9198 bytes
- Jumbo Ethernet frame : 10,240 bytes
- Dying Gasp : Yes (FE: No)
- MTBF in hours (data) : 2,026,793
- MTBF in hours (PoE) : 698,220
- MTBF in hours (Full PoE) : 698,220
Environmental
- Operating temperature
- Sea level : -5 to 50 deg C*
- Up to 5,000ft (1500 m) : -5 to 45 deg C
- Upto 10,000 (3000 m) : -5 to 40 deg C
- Operating altitude : 10,000 ft (3,000m)
- Operating relative humidity : 5% to 90% at 40 deg C (non-condensing)
- Storage temperature : -13 to 158F (-25 to 70C)
- Storage altitude : 15,000 ft (4500m)
- Storage relative humidity : 5% to 95% at 65 deg C (non-condensing)
- *Note:
- 50C operation is supported for short term operation only;
- When using C1000-8T-E-2G-L, C1000-8T-2G-L, C1000-8P-E-2G-L, C1000-8P-2G-L, C1000-8FP-E-2G-L, C1000-8FP-2G-L, C1000-16T-E-2G-L, C1000-16T-2G-L, C1000-16P-E-2G-L, C1000-16P-2G-L, C1000-16FP-2G-L, C1000-24T-4G-L, C1000-24P-4G-L with GLC-BX-U or GLC-BX-D SFP module, the thermal limitations are as follows:
- Up to 5,000 feet, the operation temperature should not exceed 45ºC.
- Up to 10,000 feet, the operation temperature should not exceed 40ºC.
- When using C1000-24T-4X-L, C1000-24P-4X-L with SFP-10G-ER or SFP-10G-ER-S SFP+ module, the thermal limitations are as follows:
- Up to 5,000 feet, the operation temperature should not exceed 45ºC.
- Up to 10,000 feet, the operation temperature should not exceed 40ºC.
- Minimum ambient temperature for cold start is at 0 deg C (32 deg F)
Safety and compliance
- Safety
- UL 60950-1 Second Edition, CAN/CSA-C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, AS/NZS 60950-1, IEC 62368-1, UL 62368-1
- GB 4943.1-2011
- EMC: Emissions : 47CFR Part 15 Class A, AS/NZS CISPR32 Class A, CISPR32 Class A, EN55032 Class A, ICES-003 Class A, VCCI-CISPR32 Class A, EN61000-3-2, EN61000-3-3, KN32 Class A, CNS13438 Class A
- EMC: Immunity : EN55024 (including EN 61000-4-5), EN300386, KN35
- Environmental : Reduction of Hazardous Substances (RoHS) including Directive 2011/65/EU
- Telco : Common Language Equipment Identifier (CLEI) code
- U.S. government certifications : USGv6 and IPv6 Ready Logo
Connectors and interfaces
- Ethernet interfaces :
- 10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 Unshielded Twisted Pair (UTP) cabling
- 100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling
- 1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
- 1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
- Indicator LEDs
- Per-port status: link integrity, disabled, activity
- System status: System
- Console cables
- CAB-CONSOLE-RJ45 Console cable 6 ft. with RJ-45
- CAB-CONSOLE-USB Console cable 6 ft. with USB Type A and mini-B connectors
- Power
- Use the supplied AC power cord to connect the AC power connector to an AC power outlet
- Models have external power supply
- Management
- BRIDGE-MIB
- CISCO-CABLE-DIAG-MIB
- CISCO-CDP-MIB
- CISCO-CLUSTER-MIB
- CISCO-CONFIG-COPY-MIB
- CISCO-CONFIG-MAN-MIB
- CISCO-DHCP-SNOOPING-MIB
- CISCO-ENTITY-VENDORTYPE-OID-MIB
- CISCO-ENVMON-MIB
- CISCO-ERR-DISABLE-MIB
- CISCO-FLASH-MIB
- CISCO-FTP-CLIENT-MIB
- CISCO-IGMP-FILTER-MIB
- CISCO-IMAGE-MIB
- CISCO-IP-STAT-MIB
- CISCO-LAG-MIB
- CISCO-MAC-NOTIFICATION-MIB
- CISCO-MEMORY-POOL-MIB
- CISCO-PAGP-MIB
- CISCO-POE-EXTENSIONS-MIB
- CISCO-PORT-QOS-MIB
- CISCO-PORT-SECURITY-MIB
- CISCO-PORT-STORM-CONTROL-MIB
- CISCO-PRODUCTS-MIB
- CISCO-PROCESS-MIB
- CISCO-RTTMON-MIB
- CISCO-SMI-MIB
- CISCO-STP-EXTENSIONS-MIB
- CISCO-SYSLOG-MIB
- CISCO-TC-MIB
- CICSO-TCP-MIB
- CISCO-UDLDP-MIB
- CISCO-VLAN-IFTABLE
- CISCO-VLAN-MEMBERSHIP-MIB
- CISCO-VTP-MIB
- ENTITY-MIB
- ETHERLIKE-MIB
- IEEE8021-PAE-MIB
- IEEE8023-LAG-MIB
- IF-MIB
- INET-ADDRESS-MIB
- OLD-CISCO-CHASSIS-MIB
- OLD-CISCO-FLASH-MIB
- OLD-CISCO-INTERFACES-MIB
- OLD-CISCO-IP-MIB
- OLD-CISCO-SYS-MIB
- OLD-CISCO-TCP-MIB
- OLD-CISCO-TS-MIB
- RFC1213-MIB
- RMON-MIB
- RMON2-MIB
- SNMP-FRAMEWORK-MIB
- SNMP-MPD-MIB
- SNMP-NOTIFICATION-MIB
- SNMP-TARGET-MIB
- SNMPv2-MIB
- TCP-MIB
- UDP-MIB
- For an updated list of supported MIBs, refer to the MIB Locator at cisco.com/go/mibs.
- Standards
- IEEE 802.1D STP
- IEEE 802.1p CoS Prioritization
- IEEE 802.1Q VLAN
- IEEE 802.1s
- IEEE 802.1w
- IEEE 802.1X
- IEEE 802.1ab LLDP
- Bluetooth v4.0
- IEEE 802.3ad
- IEEE 802.3af and IEEE 802.3at
- IEEE 802.3ah (100BASE-X single/multimode fiber only)
- IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports
- IEEE 802.3 10BASE-T
- IEEE 802.3u 100BASE-TX
- IEEE 802.3ab 1000BASE-T
- IEEE 802.3z 1000BASE-X
- RMON I and II standards
- SNMP v1, v2c, and v3
- IEEE 802.3az
- IEEE 802.3ae 10 Gigabit Ethernet
- IEEE 802.1ax
- RFC compliance
- RFC 768 – UDP
- RFC 783 – TFTP
- RFC 791 – IP
- RFC 792 – ICMP
- RFC 793 – TCP
- RFC 826 – ARP
- RFC 854 – Telnet
- RFC 951 – Bootstrap Protocol (BOOTP)
- RFC 959 – FTP
- RFC 1112 – IP Multicast and IGMP
- RFC 1157 – SNMP v1
- RFC 1166 – IP Addresses
- RFC 1256 – ICMP Router Discovery
- RFC 1305 – NTP
- RFC 1492 – TACACS+
- RFC 1493 – Bridge MIB
- RFC 1542 – BOOTP extensions
- RFC 1901 – SNMP v2C
- RFC 1902-1907 – SNMP v2
- RFC 1981 – Maximum Transmission Unit (MTU) Path Discovery IPv6
- FRC 2068 – HTTP
- RFC 2131 – DHCP
- RFC 2138 – RADIUS
- RFC 2233 – IF MIB v3